MVSFORUMS.com

Nithisha · Posted: Thu Nov 09, 2006 2:03 am Post subject: Job Submitted o/p not in spool

Hi Friend

I have submitted a JOB
Job is saying it is submitted giving JOB name and id .

But when i checked the program o/p in spool ,the job name is not aviable

can any one say what may be the reason.

Thanks
Nithisha

shekar123 · Posted: Thu Nov 09, 2006 2:08 am Post subject:

Nithisha

There might be two reasons:

1.Go to the command prompt in SPOOL and type PRE USERID* these will list out all jobs submitted by you.
If you find it is ok
2.In your shop there might be Job System which will route the output from SPOOL to a diffferent system where the outputs of the job runs are stored could be a different system like RMDS.If yiu have some kind of similar environment go to that and check for the job name.

Hope it helps.
_________________
Shekar
Grow Technically

vjkumk · Beginner Joined: 28 Sep 2005 Posts: 98 Topics: 33

the job may be unavailable due to the following reasons

1)Check your jobname has your alias id(login id)
2)In spool press F3 and there will be a option jobid.
(i)jobid------(if your jobname starts with other than your alias then give the first 5 characters of the jobname and give enter,so that it will display the job )

Cheers,
VJ

Bill Dennis · Posted: Thu Nov 09, 2006 9:56 am Post subject:

Another option is the MSGCLASS on the JOB card is invalid or missing and the output is being purged upon completion.
_________________
Regards,
Bill Dennis

Disclaimer: My comments on this foorum are my own and do not represent the opinions or suggestions of any other person or business entity.

ar_karthick · Posted: Mon Jan 15, 2007 5:59 am Post subject:

Give notify=userid in the job card
_________________
karthick

dbzTHEdinosauer · Posted: Mon Jan 15, 2007 8:51 am Post subject:

what are the msgclass, msglevel and class? all three parms can be set to file13 everything in the spool after execution - as well as automatically sending things to an archive.

You might just have to bit the bullet and embarrass yourself with one of your work-mates and just ask him/her, especially if your shop has archiving.

Because of your question it is probable that you are new to the shop or just new to this type of work. There are two type of questions:

those that indicate that you actually know something about computers
those that show the opposite

Spool file disposition and archiving are shop oriented; experienced people always ask about these kind of things.

Even if the JOB fails, short of auto archiving, you should have something in the spool. Insure that your SDSF options/profile are appropriately set so that you can view. PF1 in SDSF will provide you with necessary guidance to traverse SDSF.
_________________
Dick Brenholtz
American living in Varel, Germany

dbzTHEdinosauer · Posted: Mon Jan 15, 2007 8:53 am Post subject:

As previously suggested, insure you have a notify parm in your job card; are you sure that your JOB executed?

provide your jobcard parms and someone can give you help.
_________________
Dick Brenholtz
American living in Varel, Germany

Dibakar · Posted: Tue Jan 16, 2007 1:24 am Post subject:

Look at the // and /* statements before the first exec to see if any redirection is done.